================================================================================
    Juzt-Reboot™ - How too Update your Software Driver Disk & Card 
================================================================================

1. UPDATING CARD SOFTWARE DRIVER FLOPPY
=============================================

1.   Take the software driver disk you received with the product or a blank
     floppy, set write tab on the floppy to enable.  

2.   Now place the floppy in drive A:  

3.   Double click the appropriate driver link from website "Support Page".

4.   Select "Open" - Then select "OK" from the top right hand of the box.

5.   The application will then begin too format and load new drivers onto 
     the floppy disk in drive A:


2.   UPDATING YOUR CARD SOFTWARE DRIVERS
=========================================

1.   Take your updated software driver disk and place in floppy drive A:

2.   Power up your PC - at the Juzt-Reboot multi-boot menu - press F10 to enter
     into the card [Options] menu.- Enter [Supervisor password] if needed.  

3.   Now select [Upgrade] from menu and select "Yes"

4.   Your card software drivers will now be updated and your PC will reboot.


================================================================================
If you have any questions or problems please contact support@juzt-innovations.ie 
================================================================================